EasyManuals Logo
Home>Jandy>Network Hardware>AquaLink RS Conversion Kit

Jandy AquaLink RS Conversion Kit User Manual

Jandy AquaLink RS Conversion Kit
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Page 4
Section 2. Package Contents
WARNING
To avoid injury ensure that you use this
control system to control only packaged
pool/spa heaters which have built-in
operating and high limit controls to
limit water temperature for pool/spa
applications. This device should not
be relied upon as a safety limit control.
Water temperature in excess of 100°F
(38°C) may be hazardous to your
health.
WARNING
A terminal bar marked “GROUND” is
provided within the power center. To
reduce the risk of electrical shock,
connect this terminal bar to the grounding
terminal of your electric service or
supply panel with a continuous copper
conductor having green insulation
and one that is equivalent in size to
the circuit conductors supplying this
equipment, but no smaller than no. 12
AWG (3.3 mm2). In addition, a second
wire connector should be bonded with
a no. 8 AWG (8.4 mm2) copper wire to
any metal ladders, water pipes, or other
metal within five (5) feet (1.52 m) of the
pool/spa. In Canada, the bonding wire
must be minimum 6 AWG (13,3 mm2).
WARNING
A ground-fault circuit-interrupter must
be provided if this device is used to
control underwater lighting fixtures.
The conductors on the load side of the
ground-fault circuit-interrupter shall not
occupy conduit, boxes, or enclosures
containing other conductors unless
the additional conductors are also
protected by a ground-fault circuit-
interrupter. Refer to local codes for
complete details.
CAUTION:
This device is intended for
use with permanent swimming pools and
may also be used with hot tubs and spas
if so marked. Do not use with storable
pools. A permanently-installed pool is
constructed in or on the ground or in a
building such that it cannot be readily
disassembled for storage. A storable
pool is constructed so that it is capable of
being readily disassembled for storage
and reassembled to its original integrity.
When mixing acid or other chemicals
with water,
ALWAYS ADD THE ACID
OR CHEMICALS TO WATER. NEVER
ADD WATER TO THE ACID OR
CHEMICALS.
CAUTION: It is important to note that
certain materials used in and around
swimming pools and spas may not be
compatible with chemicals commonly
used to purify pool and spa water (e.g.
acids, chlorine, salt, stabilizers, etc.).
Zodiac Pool Systems LLC does not
warrant or guarantee that the chlorinated
water generated by the Jandy
®
Pro
Series chlorine generating device will not
damage or destroy certain types of plants,
decking, coping and other materials in
and around your pool and/or spa. Before
selecting materials to be used in and
around your pool and/or spa, please
discuss all options with your contractor to
assess the compatibility of such materials
and chemicals.
Some helpful considerations may
include:
• Choosing plants that can withstand
splash out of pool water containing
chlorine and/or salt and other water
purication chemicals.
Jandy
®
AquaLink
®
RS Conversion Kit

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jandy AquaLink RS Conversion Kit and is the answer not in the manual?

Jandy AquaLink RS Conversion Kit Specifications

General IconGeneral
BrandJandy
ModelAquaLink RS Conversion Kit
CategoryNetwork Hardware
LanguageEnglish

Related product manuals