Section 1. Safety Information
IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS
READ AND FOLLOW ALL INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed, including the
following:
SAVE THESE INSTRUCTIONS
WARNING
This manual contains important information about the installation, operation and safe use of this product. This
information should be given to the owner/operator of this equipment.
WARNING
This product must be installed and serviced by professionals who are qualified in pool/spa product installation and
service. Improper installation and/or operation can create an unwanted electrical hazard which can cause serious
injury, property damage, or death. Improper installation and/or operation will void the warranty.
WARNING
Disconnect power to the system at the main circuit breaker before servicing to avoid risk of electric shock which can
result in property damage, severe injury or death. All wiring must be done in accordance with the National Electrical
Code
®
(NEC
®
), NFPA-70. In Canada, all wiring must be done in accordance with the Canadian Electrical Code
(CSA C22.1). All applicable local installation codes and regulations must be followed.
Page 4
ENGLISH
Jandy
®
Pro Series Valve Actuator
|
Installation and Operation Manual
To Next Page
Loading...
Need help?
General
