Jandy JXIVFKIT - Section 1. General Information; Introduction; Technical Assistance; Section 2. Overview

Jandy
®
VersaFlo
™
Integrated Bypass for JXi
™
& JXiQ
™
Pool and Spa Heater | Installation & Operation Manual ENGLISH
Page 3
Section 1. General Information
SAVE THESE INSTRUCTIONS
1.1 Introduction
Read completely before proceeding with the installation.
This manual provides installation instructions for the VersaFlo Integrated Bypass Accessory Kit for the JXi & JXiQ
pool and spa gas heater product line.
1.2 Technical Assistance
For technical support or questions, contact your local Zodiac
®
distributor or Zodiac Pool Systems LLC at
1.800.822.7933.
Section 2. Overview
2.1 JXIVFKIT: VersaFlo Integrated BypassKit
2.1.1 Package Contents
Before starting, check that you have the correct parts as indicated below. If any parts are missing or incorrect,
please call your local distributor or Zodiac Pool Systems LLC technical support at 1.800.822.7933 for assistance.
NOTE: Check the rating plate on your heater and note the serial number revision.
If your heater serial number is revision “G” (GXXXXXX) or earlier you will also need to order:
(R0719500) - PIB Kit
(R0719400) - Flue Sensor Kit
to complete the installation.
7
6
5
4
3
2
1
Item Description Qty.
1 VersaFlo Integrated Bypass w/JXiQ Wire Harness 1
2 Installation Hardware 6
3 5/16" Light Duty Wrench 1
4 Knockout Bushing 1
5 Zip Tie 4
6 Seal 1
7 JXi Wire Harness 1