EasyManua.ls Logo

Janome 1100D - Test Sewing; Setting Foot Pressure; Controlling Sewing Speed; Waste Tray

Janome 1100D
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
SECTION IV
Test Sewing
Setting Foot Pressure
The standard setting is position 5. Turn the dial to
increase or decrease the foot pressure as needed
depending on the type of fabric.
There are six positions.
Controlling Sewing Speed
Sewing speed can be varied with the foot control. The
harder you press on the foot control, the faster the
machine runs.
Waste Tray
Attach the waste tray to the front cover. The tray will
catch fabric scraps that are cut off.

Table of Contents