Janome 1200D - The Adjustment of the Chain Looper Tension Dial; Tension Value Check; Tension Adjustment

10
Side Cover
Grasp the cover and open it to the left.
1. Presser foot lever and thread cutter
2. Needle clamp
3. Needle(s)
4. Presser foot
5. Needle plate
6. Needle plate release lever
7. Cutting width dial
8. Upper knife release knob
9. Spreader holder
Front Cover
Pull the cover to the right and open it towards you.
10. Top cover lever
11. 2-thread converter
12. Upper looper
13. Lower looper
14. Chain looper
15. Upper knife
16. Lower knife
17. Back-tack device
18. Needle plate setting knob
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10