Why is my Janome Sewing Machine skipping stitches?
Skipped stitches can occur for several reasons: * The needle is incorrectly inserted, bent, or blunt. * The needle and/or fabrics are not suitable for the work being sewn. * A Blue Tip needle is not used when sewing stretch, very fine fabrics, and synthetics. * The needle thread is not threaded properly. * A poor quality needle is being used; in this case, change the needle.
Why does the needle thread keep breaking on my Janome 1600P QC Sewing Machine?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not set under the presser foot when starting sewing. * The thread is either too heavy or too fine for the needle.
Why does the bobbin thread break on my Janome 1600P QC Sewing Machine?
The bobbin thread may break if: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the hook race. * The bobbin is damaged and doesn't turn smoothly; in this case, replace the bobbin.
Why is my Janome 1600P QC not running smoothly and is noisy?
The machine might not run smoothly and be noisy if: * Thread has been caught in the hook race. * Lint has built up in the hook race or bobbin holder. * The machine needs oiling.
Why are stitches forming loops below the fabric with my Janome 1600P QC?
Stitches may form loops below the fabric if: * The needle thread tension is too loose. * The needle is either too heavy or too fine for the thread.
What causes the cloth to not feed smoothly in my Janome 1600P QC Sewing Machine?
The cloth may not feed smoothly if: * The feed dog is packed with lint. * The stitches are too fine; in this case, make the stitch longer.
General| Stitch Speed | 1600 stitches per minute |
|---|---|
| Stitch Length | 6mm |
| Presser Foot Pressure Adjustment | Yes |
| Knee Lifter | Yes |
| Type | Mechanical |
| Operation | Manual |
| Stitch Options | Straight stitch |
| Drop Feed | Yes |
| Free Arm | No |
| Machine Weight | 24.5 lbs |
| Speed | Variable |
| Warranty | 25-year limited warranty |
Instructions to reduce the risk of electric shock.
Precautions to reduce risks of burns, fire, electric shock, or injury.
Steps for connecting the sewing machine to electrical power.
How to adjust and use the speed control slider and foot control.
Step-by-step guide to winding a new bobbin.
Detailed steps for threading the needle with the upper thread.
How to balance and adjust needle and bobbin thread tension for optimal stitches.
A guide to identify and resolve issues like thread breaks, skipped stitches, and machine errors.
To Next Page
