Janome 1600P QC - CARE & MAINTENANCE; Cleaning the Hook and Feed Dog; Oiling the Machine

36
z Remove the needle and presser foot.
x Remove the hook cover plate q and open the
hook cover w.
c Loosen the setscrew e and remove the needle plate r.
v Clean the hook t and feed dog y with a lint brush u.
b After cleaning the machine, attach the needle plate r,
needle and presser foot.
q Hook cover plate
w Hook cover
e Setscrew
r Needle plate
t Hook
y Feed dog
u Lint brush
CAUTION:
Turn the power switch off and unplug the machine
before cleaning.
Cleaning the Hook and Feed Dog
Oiling the Machine
NOTE:
Unplug the machine before oiling.
Oil the points as shown (q, w and e) with two or three
drops of oil. Use only sewing machine oil MO-70 for this
sewing machine.
Oil the machine once a day if you use the machine
frequently.
Use a soft, dry cloth to remove excess oil.
Remove the bobbin case from the hook when you oil the
hook race.
After oiling, stitch a piece of waste fabric to absorb excess
oil.
r
e
q
w
u
y
t
q
w
e
CARE & MAINTENANCE