Janome 1200D - Position of Program Selection-Display Drum Indicator and Display Window; Lever and Tension Cam Alignment; Drum Indicator and Display Window Alignment

8
SECTION I
Machine Parts
Front View
1. Pressure adjustment dial
2. Tension release lever
3. Left needle thread tension dial (yellow)
4. Right needle thread tension dial (blue)
5. Upper looper thread tension dial (red)
6. Lower looper thread tension dial (green)
7. Spool pin
8. Spool holder
9. Spool pin base
10. Machine socket
11. Power switch
12. Handwheel
13. Front cover
14. Side cover
15. Cutting width window
16. Differential feed dial (DF)
17. Stitch length dial (SL)
18. Program display panel
19. Program selection dial
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19