EasyManua.ls Logo

Janome 13512 - User Manual

Janome 13512
25 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
MODEL: 13512, 14412, 15312

Table of Contents

Questions and Answers

  • K
    Katrina TaylorAug 10, 2025
    Why is my Janome 13512 Sewing Machine skipping stitches?
    • A
      Andrea VargasAug 10, 2025
      Skipping stitches on your Janome Sewing Machine can occur for several reasons. It might be due to the needle not being inserted correctly, or the needle could be bent or worn. Also check that the machine is threaded correctly, and that you're using the appropriate needle and thread for the fabric. When sewing stretch fabric, use a #11 blue tip needle. Other causes could be related to the needle bar height, needle timing to shuttle, or clearance between the needle and hook, which may require mechanical adjustment.
  • K
    Kimberly NunezAug 25, 2025
    What to do if the fabric is not moving on my Janome 13512?
    • A
      Andrew SolomonAug 26, 2025
      If the fabric isn't moving through your Janome Sewing Machine, it could be due to several factors. The feed dog height might be incorrect. Also, check for jammed thread on the bottom side of the fabric. You should ensure that both the needle and bobbin thread are brought under the foot when starting to sew. Lastly, the feed dog teeth may be worn, and if that's the case, consider changing the feed dog.

Janome 13512 Specifications

General IconGeneral
TypeMechanical
Stitch Count12
Buttonhole Styles1
Stitch LengthUp to 4mm
Stitch WidthUp to 5mm
Built-in Needle ThreaderYes
Drop FeedYes
Free ArmYes
Bobbin TypeTop Drop-in

Related product manuals