Janome 13512 - Front Cover

6
SERVICE ACCESS
FRONT COVER
TO REMOVE:
1. Loosen the set screws (A), (B), and (C), and then, remove the front cover by removing the set screws
(D), (E), (F), (G), (H), (I) and (J).
NOTE:
Unhook the tab (L) from the rear cover when remove the front cover.
TO ATTACH:
2. Follow the above procedure in reverse.
(D)
(A)
(E)
(G)
(B)
(F)
(H)
(L)
(C)
(I)
(J)
Cap
Front cover