Need help?Do you have a question about the Janome myLock 134D and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Threads | 3/4 |
| Differential Feed | Yes |
| Speed | 1300 stitches per minute |
| Stitch Length | 1 - 4 mm |
| Needles | 2 |
| Looper Threads | 2 |
| Built-in Rolled Hem | Yes |
| Free Arm Capability | Yes |
| Stitch Options | rolled hem |
| Threading | Color-coded threading |
| Presser Feet | Standard foot |
Guidelines to prevent electric shock hazards.
Instructions to prevent burns, fire, injury, and misuse of the appliance.
Identifies and locates various components of the sewing machine.
Lists and describes various accessories included with the machine.
Steps for connecting power and turning on the machine and its light.
How to operate the foot control for speed regulation.
Instructions on turning the hand wheel and managing machine covers for safety.
Proper positioning of the telescoping thread guide bar.
How to use spool caps and nets for efficient thread feeding.
Procedures for adjusting the presser foot height.
How to begin sewing and maintain continuous stitching.
Methods for completing a seam and preventing unraveling.
Techniques to secure the beginning and end of seams to prevent unraveling.
Detailed steps for performing backstitching to secure seams.
Understanding the thread tension dial settings.
Identifying and correcting common thread tension errors.
Solutions for specific wrong tension scenarios with 4 threads.
Procedures for threading the machine using three threads.
How to adjust thread tension for three-thread stitches.
Troubleshooting incorrect thread tension for three-thread sewing.
How to set and adjust the stitch length on the machine.
Modifying the differential feed ratio for fabric stretching or puckering.
Step-by-step guide for changing the presser foot.
Instructions on how to correctly insert and remove needles.
How to move the upper knife to a disengaged position.
How to move the upper knife to an engaged position.
Identifying different needle plates and their uses.
Procedures for replacing the needle plate.
A chart recommending threads and needles for different fabric types.
Machine settings for rolled hemming, picot edging, and narrow hemming.
Dial settings for rolled hemming, picot edging, and narrow hemming with 3 threads.
Fine-tuning thread tension for hemming and edging.
Recommended settings for decorative overedging.
Machine settings and procedure for creating pin tucks.
Recommended settings for gathering fabric.
How to clean the area around the upper knife.
Instructions for cleaning the feed dog mechanism.
Step-by-step process for replacing the light bulb.
Where and how often to oil the sewing machine.
Detailed steps for removing and installing a new upper knife.
Solutions for common sewing machine problems like thread breaks and skipped stitches.
Lists and describes various optional parts for enhanced machine functionality.
To Next Page