Need help?Do you have a question about the Janome MyLock 234 and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Differential Feed | Yes |
| Speed | 1300 stitches per minute |
| Threading | Color-coded threading guide |
| Number of Threads | 3 or 4 |
| Stitch Options | rolled hem |
| Stitch Length | 1 - 4 mm |
| Differential Feed Ratio | 0.7 - 2.0 |
| Presser Feet | Standard overlock foot |
Identifies all components of the sewing machine.
Step-by-step guide to connect the machine to power.
Instructions on how to control sewing speed using the controller.
General overview of threading the machine.
Detailed steps for threading the lower looper.
Detailed steps for threading the upper looper.
Step-by-step guide for threading the right needle.
Step-by-step guide for threading the left needle.
Details on adjusting thread tension for four-thread setups.
Details on adjusting thread tension for three-thread setups.
Procedure for changing the sewing machine needle.
Details machine settings for rolled hemming, picot edging, and narrow hemming.
Guidance on selecting thread, fabric, and tension dial settings.
How to adjust thread tension for specific hemming techniques.
Settings for decorative overedging including fabric, thread, and tension.
To Next Page
