Need help?Do you have a question about the Janome 2049 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Bobbin Type | Top Drop-in Bobbin |
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Free Arm | Yes |
| Stitch Options | Utility, Decorative |
| Buttonhole Styles | 4-Step |
| Max Stitch Length | 4 mm |
| Max Stitch Width | 5 mm |
| Bobbin | Class 15 |
| Speed Control | No |
| Presser Feet | Zipper Foot |
Lists causes & fixes for skipped stitches: needle, threading, timing.
Explains causes: hitting plate, worn needle, hook timing, fabric handling.
Checks and adjusts upper thread tension using dial and adjusting nut.
Checks and adjusts bobbin thread tension using spring and screw.
Sets clearance between needle and shuttle hook by moving needle bar supporter.
Adjusts needle to shuttle hook clearance by shifting lower shaft.
Adjusts needle timing with shuttle hook using test pin and gauge.
To Next Page
