Why Janome Sewing Machine skipping stitches?
Your Janome Sewing Machine may be skipping stitches due to: * The needle is not set correctly. * The needle is bent or blunt. * The tension is out of balance. * The machine is not threaded correctly.
Why does the needle thread keep breaking on my Janome Sewing Machine?
The needle thread may break on your Janome Sewing Machine due to several reasons: * The machine is not threaded correctly. * The thread tension is too tight. * The needle is bent or blunt. * The needle is not set correctly. * A wrong needle is used.
Why is there seam puckering on my Janome Sewing Machine?
Seam puckering may occur because the tension is out of balance.
General| Type | Coverstitch |
|---|---|
| Differential Feed | Yes |
| Free Arm | Yes |
| Number of Threads | 3 |
| Stitch Width | 6 mm |
| Stitch Length | 4 mm |
| Sewing Speed | 1, 000 stitches per minute |
| Differential Feed Ratio | 0.5 to 2.25 |
| Threading chart | Yes |
| Number of Needles | 2, 3 |
Identifies and labels the various components of the sewing machine for user reference.
Lists and illustrates all the essential accessories included with the sewing machine.
Step-by-step instructions for safely connecting the sewing machine to an electrical power source.
Guidance on how to adjust and manage the sewing speed using the foot control pedal.
Instructions for turning the handwheel, operating the looper cover, and using the extension table.
Covers raising, lowering, removing, attaching, and adjusting the presser foot pressure.
Instructions for adjusting stitch length and differential feed ratio for optimal sewing.
Guidance on changing needles and using the needle threader for preparation.
Steps for setting the thread guide bar and spool cones for machine threading.
Comprehensive, step-by-step guide for threading all necessary threads through the machine.
Detailed instructions on threading each of the machine's needles correctly.
Practical guide on how to effectively use the needle threader for easier threading.
Specific instructions for threading the looper mechanism of the sewing machine.
Details on the triple cover stitch, its applications, and how to balance thread tension.
Explanation of the different cover stitch types and their threading requirements.
How to set and balance thread tensions for cover stitches.
Information on the chain stitch, its uses, and thread tension balancing.
Troubleshooting guide for fabric curling issues during sewing.
Steps for starting, ending seams, and knotting threads for a clean finish.
Instructions on how to remove fabric from the machine during stitching without cutting threads.
Detailed steps for performing a hem using the cover stitch method.
Guidance on hemming tubular garment parts using the free arm feature.
Examples and illustrations of using the triple cover stitch for various sewing applications.
Procedure for cleaning the feed dogs and looper area to maintain machine performance.
Troubleshooting common problems related to needle thread breaks and needle bending/breaking.
Solutions for skipped stitches, seam puckering, and machine not operating.
To Next Page