Janome 2000CPX - Threading the Needles

20
(A)
(B)
q
z
Threading the needles
Thread each needle in the following steps:
z
Draw the thread through the left side thread guide bar
from back to front as shown (A).
NOTE:
If the thread is coming out from the thread guide notch,
pass the thread through the thread guide hole again as
shown (B)
q
Thread guide bar
x
Slip the thread into the thread guide plate on the
machine as shown.
w
Thread guide plate
1
2
3
4
5
6
7
8
9
10
w
x