Janome 2000CPX - Stitch Length and Differential Feed Adjustment

12
w
e
q
r
w
w
e
q
r
w
Adjustment of Stitch Length
To adjust the stitch length, turn the dial.
The larger the number, the longer the stitch.
For regular sewing, set the stitch length at 3 – 3.5.
q
Stitch length dial
w
Setting mark
e
To lengthen
r
To shorten
Adjustment of Differential Feed Ratio
The differential feed ratio can be altered by turning the
dial.
The number on the dial indicates the ratio between the
main and the sub feed motion.
• Set the dial at 1.0 for regular sewing.
• Set the dial at a lower number when sewing ne fabrics
that tend to pucker.
• Set the dial at a higher number when sewing stretch
fabrics such as knits, jersey and tricot.
q
Differential feed dial
w
Setting mark
e
To shrink
r
Changing Needle