Need help?Do you have a question about the Janome 2018 and is the answer not in the manual?
General| Brand | Janome |
|---|---|
| Model | 2018 |
| Category | Sewing Machine |
| Language | English |
Setting the sewing machine's stitch pattern dial for different stitches.
Adjusting the stitch length for models 2049 and 2041.
Adjusting the stitch width for models 2049 and 2041.
Troubleshooting and fixing skipped stitches on the sewing machine.
Resolving issues where the fabric feed mechanism is not working.
Identifying causes and solutions for the upper thread breaking.
Identifying causes and solutions for the bobbin thread breaking.
Troubleshooting reasons for sewing machine needle breakage.
Diagnosing and fixing sources of noise during sewing machine operation.
Adjusting settings to correct distorted stitch patterns.
Instructions for removing and attaching the sewing machine's face cover.
Steps for removing and attaching the sewing machine's front cover.
Procedures for removing and attaching the sewing machine's rear cover.
Procedure for checking and adjusting the upper thread tension.
Procedure for checking and adjusting the bobbin thread tension.
Adjusting the presser bar height and its alignment with the needle plate.
Adjusting the sideways movement of the needle bar for zigzag stitches.
Setting the correct vertical drop position of the needle.
Adjusting the clearance between the needle and shuttle hook (Method 1).
Adjusting the clearance between the needle and shuttle hook (Method 2).
Adjusting the height of the feed dogs for proper fabric feeding.
Setting the correct vertical height of the needle bar.
Adjusting the timing between the needle and the shuttle hook.
Correcting distorted stitch patterns, especially stretch stitches.
Ensuring balanced feeding for consistent buttonhole stitches.
Adjusting the feed mechanism for bartack stitches in buttonholes.
Adjusting the length and function of buttonholes.
Adjusting the cam claw for proper pattern selector dial operation.
Adjusting the tension of the motor drive belt for optimal performance.
To Next Page
