Need help?Do you have a question about the Janome 5050 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Stitches | 50 |
| Maximum Stitch Width | 5mm |
| Maximum Stitch Length | 4mm |
| Needle Threader | Yes |
| Bobbin Type | Top drop-in |
Adjusting the distance between the presser foot and needle plate.
Setting the needle drop position relative to the needle plate hole.
Adjusting the timing between the needle and the rotary hook.
Adjusting the needle bar height for proper hook clearance.
Setting the clearance between needle and hook tip.
Adjusting the highest position of the feed dog.
To Next Page