Janome 900 - DECORATIVE STITCHING METHODS; Shell Tuck and Stretch Patterns

26
4
1
2
3
4
1
2
3
5
5
43210
STRETCH
L
S
0 51234
43210
STRETCH
L
S
0 51234
Place the folded edge along the slot of foot.
The needle should fall off the edge of the fabric on the right
forming a tuck.
If forward and reverse feeds become unbalanced due to the type
of fabric, adjust the balance by sliding the stitch length control as
follows:
If patterns are compressed, slide the control toward “L”.
If patterns are drawn, slide the control toward “ S”.
(See page 28)
SECTION 5. DECORATIVE STITCHING
Shell Tuck
q Pattern selector:
w Presser foot: Satin stitch foot
e Thread tension: 6–8
r Stitch length: 2–3
t Stitch width: 5
Stretch Stitch Patterns
q Pattern selector:
w Presser foot: Zigzag foot
e Thread tension: 1–4
r Stitch length: STRETCH
t Stitch width: 5