What to do if the buttonhole is not sewn well on my Janome DC 3018?
To improve buttonhole sewing on your Janome Sewing Machine: * Adjust the stitch density for the fabric. * Use interfacing with stretch fabrics.
General| Type | Computerized |
|---|---|
| Stitch Options | 18 |
| Stitch Count | 18 |
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Needle Threading | Automatic |
| Foot Control | Yes |
| Weight | 5.5 kg |
| Dimensions | 15.5 x 6.5 x 12 inches |
| Bobbin Type | Top Drop-in |
| Free Arm | Yes |
| LCD Screen | Yes |
| Speed Control | Yes |
| Presser Feet | General Purpose Foot, Zipper Foot, Buttonhole Foot, Satin Stitch Foot |
Instructions to reduce the risk of electric shock, including unplugging the machine when unattended.
Precautions to reduce risks of burns, fire, electric shock, or injury to persons using the appliance.
Step-by-step guide on connecting the power supply, foot control, and wall outlet.
Using the 'A' setting for auto tension in general sewing.
Common causes and solutions for the needle thread breaking.
Common causes and solutions for the bobbin thread breaking.
Common causes and solutions for the needle breaking.
Common causes and solutions for needle thread looping.
Common causes and solutions for skipped stitches.
Common causes and solutions for seam puckering.
Common causes and solutions for uneven fabric feeding.
Common causes and solutions for the machine not operating.
Common causes and solutions for distorted stitch patterns.
Common causes and solutions for poorly sewn buttonholes.
Common causes and solutions for excessive noise during operation.
To Next Page
