Janome HF2022 - Stretch Stitch Feed Balance

MECHANICAL ADJUSTMENT
FEED BALANCE ON STRETCH STITCH
CORRECT SETTING
IF THE STRETCH STITCH PATTERNS ARE DISTORTED WITH SETTING THE STITCH LENGTH DIAL
AT “SS”.
(IN CASE OF BEING A DIFFERENCE BETWEEN FORWARD FEEDING AND BACKWARD FEEDING
DURING STRETCH STITCH PATTERNS), MAKE AN ADJUSTMENT AS FOLLOWS:
TO ADJUST
1. REMOVE THE CAP.
2. SET THE PATTERN SELECTOR DIAL AT “
”, AND THE STITCH LENGTH DIAL AT “SS”.
NOTE:
FOR MODEL 2022 ... SET THE PATTERN SELECTOR DIAL AT “
”.
SET THE WIDTH SELECTOR DIAL AT “ 0 ”.
SET THE STITCH LENGTH DIAL AT “ SS ”.
3. TURN THE STRETCH STITCH ADJUSTING SCREW IN THE DIRECTION OF C WHEN A > B,
OR IN THE DIRECTION OF D WHEN A < B.
4. MOUNT THE CAP.
STRETCH STITCH
ADJUSTING SCREW
CAP
NOTCH
1
2
3B
A
A
1
2
3
B
A
A
1
2
3
B
A
A
A
B
A
B
A
B
17