Janome HF2022 - Service Access and Component Removal; Face Plate Removal and Attachment; Belt Cover Access and Removal; Base Cover Access and Removal

SERVICE ACCESS
FACE PLATE
TO REMOVE
1. REMOVE THE FACE PLATE BY REMOVING THE CAP AND SET SCREW.
TO ATTACH
2. MOUNT THE FACE PLATE BY THE SET SCREW, AND THEN, MOUNT THE CAP.
BELT COVER
TO REMOVE
1. LOOSEN THE SET SCREW, AND REMOVE THE BELT COVER BY REMOVING THE
BELT COVER RIB FROM THE FRONT COVER.
TO ATTACH
2. MOUNT THE BELT COVER RIB TO THE FRONT COVER, AND THEN, MOUNT THE
BELT COVER BY THE SET SCREW.
BASE COVER
TO REMOVE
1. REMOVE THE BASE COVER BY FOUR SET SCREWS.
TO ATTACH
2. MOUNT THE BASE COVER BY FOUR SET SCREWS.
FRONT COVER
RIB
BELT COVER
SET SCREW
SET SCREW
SET SCREW
BASE COVER
BASE COVER
NOTCH
FACE PLATE
CAP
SET SCREW
4