Janome Horizon Memory Craft 8200 QCP Special Edition - Zipper Sewing; Fabric Preparation and Initial Steps

34
Fabric preparation
Add 1 cm (3/8˝) to the zipper size. This is the overall
opening size.
q Right sides of the fabric
w 1 cm (3/8˝)
e Opening size
r Zipper size
t End of the zipper opening
Zipper Sewing
Machine settings
q Pattern: MODE 1: 01
w Thread tension: AUTO
e Presser foot: Zipper foot E
Zigzag foot A
r Foot pressure: 5
q
e
w
r
q
w
e r
t
o
i
t
u
y
Place the right sides of the fabric together and sew to the
end of the opening with a 2 cm (5/8˝) seam allowance.
Reverse stitch to lock the seams.
Manually increase the stitch length to 5.0 and baste the
zipper opening with the thread tension loosened to 1-3.
t End of the zipper opening
y 2 cm (5/8˝) seam allowance
u Basting
i Reverse stitches
o Seam stitches
NOTE:
The needle drop position should be adjusted when
sewing with the zipper foot E.