Janome Horizon Memory Craft 8200 QCP Special Edition - Changing Needle Drop Position; Adjusting Needle Drop for Blind Hemming; Adjusting Straight Stitch Length; Lengthening Straight Stitches

43
Press the “ ” sign to move the needle to the right.
Press the “ ” sign to move the needle to the left.
q Left needle drop position
w Right needle drop position
e Guide on foot
r Distance between the left needle position and the
guide
NOTE:
The stitch width of patterns 19 (MODE 1) and 20
(MODE 1) cannot be changed, but the needle drop
position will move.
Changing the needle drop position
Press the stitch width adjusting key.
The LCD screen shows the distance between the left
needle position and the guide in millimeters r.
→←
r
e
r
q
w
Making the straight stitches in pattern number 19
longer
Program a combination of patterns 19 (MODE 1) and
pattern 39 (MODE 2).
Two straight stitches will be added to the blind hem stitch
when combining with pattern 39 (MODE 2) q (Refer to
page 75).
q