Janome Horizon Memory Craft 8200 QCP Special Edition - Eyelet; Eyelet Sewing and Adjustment

56
To adjust the evenness of darning stitches
You฀can฀correct฀unevenness฀of฀darning฀stitches฀by฀
pressing the “ ” or “ ” key of the stitch length
adjusting key.
If the left corner is lower than the right side, press the
“ ” key to correct it, and vice versa.
NOTE:
The evenness can be adjusted within d1 to d9
(default setting is d5).
d1–d4 d6–d9