Janome Jubilee 60507 - User Manual

SERVICE MANUAL
&
PARTS LIST
MODEL: Jubilee 60507

Summary

What to do when

Skipping stitches

Troubleshooting common sewing issues related to skipped stitches, including needle and thread problems.

Fabric not moving

Diagnosing and fixing issues where the fabric feed mechanism is not working correctly.

Breaking upper thread

Breaking bobbin thread

Needle breaks

Adjusting Thread Tension

Adjusting Presser Foot Height and Alignment

Adjusting Needle Swing

Adjusting Needle Drop Position

Adjusting Needle to Hook Timing

Adjusting Needle Bar Height

Adjusting Clearance between Needle and Hook Point

Adjusting Backlash between Hook Drive Gear and Lower Shaft Gear

Adjusting Feed Dog Height

Replacing Motor and Adjusting Motor Belt Tension

Janome Jubilee 60507 Specifications

General

Type	Mechanical
Buttonhole Styles	1
Max Stitch Width	5mm
Max Stitch Length	4mm
Needle Positions	3
Free Arm	Yes
Needle Threader	Yes
Drop Feed	Yes
Bobbin Type	Top Drop-in
Stitch Length	Adjustable
Stitch Width	Adjustable