Need help?Do you have a question about the Janome JW7630 and is the answer not in the manual?
General| Stitch Options | 30 |
|---|---|
| Buttonhole Styles | 1 |
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Needle Positions | 3 |
| Foot Pedal | Yes |
| Bobbin Type | Drop-in |
| Needle Threader | Yes |
| Included Accessories | Bobbins, Needle Set, Screwdriver, Seam Ripper, Spool Holder |
| Type | Mechanical Sewing Machine |
| Presser Feet | Zipper Foot, Buttonhole Foot |
Troubleshooting common causes and fixes for skipped stitches.
Troubleshooting common causes and fixes for fabric feed problems.
Initial checks for machine response and light issues.
Steps to access the diagnostic modes.
Verifying the 7-segment LED and Mode LED functions.
Verifying switch operations and bobbin winder switch.
Testing the buttonhole and upper shaft sensors.
Testing the sewing speed sensor.
Testing slide volume and foot controller functions.
Testing zigzag width and feed motors.
Testing the DC motor operation and speed.
To Next Page
