Janome JW7630 - Service Access (6) Rear Cover

8
SERVICE ACCESS (6)
REAR COVER
TO REMOVE:
1. Remove the top cover and belt cover (see pages 3 and 6).
2. Loosen the setscrews (A), (B), (C), and (D), then remove the setscrew (E).
3. Remove the rear cover.
* To remove the cover, detach the presser foot lifter section first, with the presser foot lifter in the down
position.
TO INSTALL:
4. Follow the above procedure in reverse.
Setscrew (A)
Setscrew (E)
Setscrew (B)
Setscrew (C)
Setscrew (D)
Presser foot lifter