3
Cap
Face cover
SERVICE ACCESS (1)
Ribs
FACE COVER
TO REMOVE:
1. Remove the cap.
2. Remove the setscrew (A) and remove the face cover.
TO INSTALL:
3. Insert the 2 ribs of the face cover into the rear cover and tighten the setscrew, then attach the cap.
TOP COVER
TO REMOVE:
1. Remove the face cover.
2. Remove the setscrew (B), (C), and remove the top cover.
TO INSTALL:
3. Follow the above procedure in reverse.
Ribs
Setscrew (C)
Setscrew (B)
Setscrew (A)
To Next Page
Loading...
