Janome JR3203N-BC User Manual

JANOME DESKTOP ROBOT
JR3000 Series
Thank you for purchasing this Janome Robot.
z
Before using your robot, please read this manual thoroughly
and always make sure you use the robot correctly. In
particular, be sure to thoroughly read “For Your Safety” as it
contains important safety information.
z
After reading this manual, store in a safe place that can be
easily accessed at any time by the operator.
z
This manual is written according to IEC 62079.
Original Instructions
Operation Manual
Specifications

Janome JR3203N-BC Specifications

General

Type	Mechanical
Max Stitch Width	5mm
Max Stitch Length	4mm
Needle Threading	Manual
Needle Threader	Yes
Free Arm	Yes
Buttonhole Styles	4-Step
Bobbin Type	Top drop-in

Summary

For Your Safety

Understanding Safety Symbols

Explains symbols for danger levels and necessary safety actions.

Safety Enclosures and Auxiliary Axes

Details safety measures for auxiliary axis functions and enclosures.

Pre-Operation Safety Checks

Covers essential checks before robot operation and installation.

Safety Measures for Enclosure Work

Guidelines for protective gear and working within safety enclosures.

Environmental and Electrical Safety

Precautions for environment, power, and electrical connections.

Installation and Environmental Precautions

Safe installation practices and environmental usage conditions.

Operational Safety and Function Checks

Ensuring safety during operation and regular function checks.

Tool Attachment and Maintenance Safety

Safety procedures for attaching tools, maintenance, and transport.

Robot Lineup

Understanding Model Numbers

Explanation of the model number structure and its components.

Identification Plate Information

Reading the Identification Plate

Detailed guide to interpreting the robot's identification plate.

Identification Plate Locations

Visual guide showing where identification plates are located.

I/O Polarity Specifications

Understanding I/O Polarity Types

Explanation of NPN (sink type) and PNP (source type) I/O polarity.

I/O Power Supply Options

Details on external versus internal I/O power supply configurations.

I/O-SYS Interface Details

I/O-SYS Connectors and Polarity

Overview of I/O-SYS connectors and polarity identification.

I/O-SYS Connector Pin Assignments

Detailed pin numbering and insulator color for I/O-SYS cables.

I/O-SYS Output Capacity

Information on the rated output capacity for I/O-SYS pins.

I/O-SYS Function Assignments

Table mapping I/O-SYS pins to their assigned functions.

Fieldbus Function Assignments

Fieldbus Input/Output Functions

Lists input/output functions assigned to Fieldbus modules.

I/O-1 Optional Interface

I/O-1 Connector Information

Description of the I/O-1 connector and polarity considerations.

I/O-S Optional Interface

I/O-S Safety Device Connection

Instructions for connecting safety devices like area sensors to I/O-S.

Fieldbus Optional Interface

Fieldbus Module Types and Settings

Overview of compatible Fieldbus modules and general setup advice.

DeviceNet Connector and Status LEDs

Description of the DeviceNet connector and its status LEDs.

DeviceNet Settable Parameters

Configuration options for DeviceNet, like word amount and station number.

Profibus Connector and Status LEDs

Description of the Profibus connector and its status LEDs.

Profibus Operation Mode and Settable Contents

Profibus OP/ST LEDs, operation modes, and settable parameters.

CC-Link Connector and Status LEDs

Description of the CC-Link connector and its status LEDs.

CC-Link Settable Parameters

Configuration options for CC-Link, like station number and speed.

Memory Port Functionality

Using the Memory Port

Overview of capabilities and confirmed USB memory devices.

Teaching Data Backup Procedures

Step-by-step guide for backing up and retrieving teaching data.

System Software and PS Data Updates

Instructions for updating system software and PS data via USB.

LAN Port Connectivity

LAN Port Functionality

Details on functions available via the standard Ethernet LAN port.