Why does the needle thread break on my Janome M100QDC Sewing Machine?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle threads is not set under the presser foot when start sewing. * The thread is either too heavy or too fine for the needle.
Why does my Janome Sewing Machine skip stitches?
Skipped stitches can occur if: * The needle is incorrectly inserted, bent, or blunt. * The needle and/or threads are not suitable for the fabric. * A blue tip needle is not being used for sewing stretch, very fine fabrics, and synthetics. * The needle thread is not threaded properly. * A poor quality needle is used. If so, change the needle.
Why does the bobbin thread break on my Janome M100QDC Sewing Machine?
The bobbin thread may break if: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and does not turn smoothly. If this is the case, change the bobbin. * The thread is wound loosely on the bobbin.
Why is my Janome Sewing Machine so noisy?
Your sewing machine might be noisy because thread has been caught in the hook race, or lint has built up in the hook race or bobbin holder.
What to do if the fabric is not feeding smoothly on my Janome M100QDC?
If the fabric isn't feeding smoothly, it could be that the feed dog is packed with lint, the stitches are too fine (make stitch longer), or the feed dog is not raised after “drop feed” sewing.
Why is my Janome M100QDC Sewing Machine not sewing buttonholes properly?
If buttonholes aren't sewing properly, the stitch density may not be suitable for the fabric, interfacing hasn't been used for stretch or synthetic fabrics (apply an interfacing), or the buttonhole lever isn't lowered.
What to do if the needle breaks on my Janome M100QDC Sewing Machine?
If the needle breaks, it could be due to: * Incorrect insertion of the needle. * A loose needle clamp screw. * Failure to draw the threads to the rear after sewing. * Using a needle too fine for the fabric. * Using an inappropriate presser foot. In this case, use the correct foot.
Why does my Janome M100QDC have loops on the seams?
Loops on the seams can appear if the needle thread tension is too loose, or the needle is too thick or too fine for the fabric.
Why is my Janome M100QDC Sewing Machine seam puckering?
Seam puckering may occur if the needle thread tension is too tight, the needle thread is not threaded properly, the needle is too heavy for the fabric, the stitch length is too long for the fabric (make stitch shorter), or a stabilizer is not used when sewing very fine fabrics (apply a stabilizer).
What to do if my Janome Sewing Machine does not work?
Your machine may not work if it is not plugged in, thread has been caught in the hook race, or the bobbin winder spindle is not returned to the left after bobbin winding.
General| Brand | Janome |
|---|---|
| Model | M100QDC |
| Category | Sewing Machine |
| Language | English |
Follow essential safety measures to prevent electric shock hazards.
Adhere to warnings for safe operation, including child safety and proper use.
Locate and identify the main parts of the sewing machine.
Review the standard accessories provided with your sewing machine.
Learn how to attach and adjust the extension table for more workspace.
Properly insert the stitch chart into its holder for easy reference.
Connect the power cord and foot control for machine operation.
Learn how to start and stop the machine using the dedicated button.
Understand the functions of the start/stop, reverse, and auto-lock buttons.
Manage needle position, thread cutting, and sewing speed with dedicated buttons.
Interpret the information shown on the LCD screen for stitch and setting details.
Navigate stitch patterns, width, and length using function keys.
Learn to raise, lower, and change the presser foot correctly.
Manage the foot holder and adjust presser foot pressure for different fabrics.
Ensure ideal stitch balance by adjusting needle thread tension.
Troubleshoot and fix issues with tension being too tight or too loose.
Adjust zigzag stitch tension for optimal appearance and prevent puckering.
Lower or raise the feed dog for specific sewing techniques like darning.
Set the needle to stop up or down for convenient fabric manipulation.
Properly change the needle for different fabrics and stitch types.
Consult the chart for recommended needles based on fabric type and thread.
Load the spool correctly on the horizontal or extra spool pin.
Learn how to remove the bobbin case and prepare for winding.
Correctly insert the bobbin and thread it through the bobbin holder.
Follow the sequence to thread the upper thread correctly through the machine.
Utilize the built-in needle threader for quick and easy threading.
Learn the technique to bring the bobbin thread up to the needle area.
Perform basic straight stitch sewing and secure seams.
Utilize the automatic thread cutting feature for efficiency.
Pivot fabric for direction changes and sew thick materials.
Use seam guides for accuracy and turn square corners effectively.
Alter the needle's lateral position for precise stitch placement.
Modify stitch length for different fabric types and desired results.
Explore stitches for securing seams and enhancing fabric elasticity.
Create decorative effects with sculpture stitches for a hand-worked look.
Adjust zigzag stitch width and length for various decorative and functional uses.
Finish raw fabric edges neatly with overcasting and overedge stitches.
Use multiple zigzag stitches for durable edge finishing and darning.
Sew knit fabrics with a flexible stitch for comfort and durability.
Attach elastic securely to garments using a specialized stitch.
Learn about square, round-end, and keyhole buttonholes.
Explore stretch, antique, welted, and corded buttonholes.
Follow the steps to create a perfectly sized square buttonhole.
Create decorative corded buttonholes using the specific foot and procedure.
Construct welted buttonholes for a tailored garment finish.
Reinforce worn areas and adjust darning evenness.
Apply tacking stitches for reinforcement on pockets and seams.
Create neat eyelets for belts and decorative accents.
Attach the correct zipper foot and prepare fabric for zipper insertion.
Step-by-step guide to sewing zippers accurately into garments.
Achieve invisible hems with this stitch and adjust needle position.
Sew buttons securely onto fabric using the dedicated stitch.
Create gathers for decorative effects or fitted seams.
Add decorative details using shell tuck and applique stitches.
Create pintucks and fringes for decorative fabric embellishments.
Execute drawn work and cross stitch designs efficiently.
Join fabric, add knots, and create scallop edges decoratively.
Apply smocking for decorative treatment and stippling for quilting.
Utilize clasp stitches for quilting and satin stitches for embellishments.
Adjust stitch patterns for optimal appearance on various fabrics.
Maintain your machine by cleaning the hook race, feed dog, and bobbin holder.
Properly install the bobbin holder after cleaning or maintenance.
Interpret LCD warnings and buzzer signals for quick issue resolution.
Resolve common problems related to thread breaks, skipped stitches, and needle issues.
Address issues with seam puckering, fabric feeding, and seam loops.
Troubleshoot when the machine does not work or is noisy.
Resolve buttonhole sewing problems and machine noise.
To Next Page
