Janome MXL50 - User Manual

Questions and Answers:

C
Collin HamptonAug 12, 2025
Why is my Janome Sewing Machine skipping stitches?
- M
  Marcus BakerAug 12, 2025
  If your Janome Sewing Machine is skipping stitches, here are some possible causes: * The needle is incorrectly inserted, bent or blunt. * The needle and/or threads are not suitable for the work being sewn. * A blue tip needle is not being used for sewing stretch, very fine fabrics and synthetics; in this case, use the stretch stitch needle. * The needle thread is not threaded properly. * A poor quality needle is used; consider changing the needle.
J
Jason OwenAug 16, 2025
Why does the needle thread keep breaking on my Janome Sewing Machine?
- K
  Kimberly JohnsonAug 16, 2025
  The needle thread of your Janome Sewing Machine might be breaking due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle threads is not set under the presser foot when start sewing. * The thread is either too heavy or too fine for the needle.
A
April PaulAug 20, 2025
Why does the bobbin thread break on my Janome MXL50?
- R
  richardshannonAug 20, 2025
  The bobbin thread on your Janome Sewing Machine might be breaking because: * The bobbin thread is not threaded properly in the bobbin holder. * Lint has collected in the bobbin holder. * The bobbin is damaged and does not turn smoothly; in this case, change the bobbin. * The thread is wound loosely on the bobbin.
E
Emily BrockAug 25, 2025
Why is my Janome MXL50 Sewing Machine so noisy?
- F
  fryebryanAug 25, 2025
  Your Janome Sewing Machine might be noisy because thread has been caught in the hook race or lint has built up in the hook race or bobbin holder.
B
Brandon DayAug 27, 2025
What causes fabric to not feed smoothly in my Janome Sewing Machine?
- T
  Terri BradshawAug 27, 2025
  If the fabric is not feeding smoothly through your Janome Sewing Machine, it could be because the feed dog is packed with lint, the stitches are too fine (make stitch longer), or the feed dog is not raised after “drop feed” sewing.
R
rickymcfarlandAug 31, 2025
What causes loops on the seams when using my Janome MXL50?
- J
  Julie MurphySep 1, 2025
  Loops on the seams of your Janome Sewing Machine may appear if the needle thread tension is too loose, or if the needle is too thick or too fine for the fabric.
J
Jeanne DouglasSep 4, 2025
How to fix seam puckering on my Janome MXL50?
- C
  Christopher ColeSep 4, 2025
  Seam puckering on your Janome Sewing Machine can occur due to several factors: * The needle thread tension is too tight. * The needle thread is not threaded properly. * The needle is too heavy for the fabric being sewn. * The stitch length is too long for the fabric; in this case, make stitch shorter. * A stabilizer is not used when sewing very fine fabrics; in this case, apply a stabilizer.
R
ricedanaSep 7, 2025
Why is buttonhole sewing not working properly on my Janome MXL50?
- C
  Catherine RomanSep 7, 2025
  If buttonholes are not sewing properly on your Janome Sewing Machine, it may be because the stitch density is not suitable for the fabric being sewn, interfacing has not been used for stretch or synthetic fabric (apply an interfacing), or the buttonhole lever is not lowered.

Janome MXL50 Specifications

General

Type	Mechanical
Buttonhole Styles	1
Maximum Stitch Width	5mm
Maximum Stitch Length	4mm
LCD Screen	No
Drop Feed	Yes
Free Arm	Yes
Needle Threader	Yes
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Dimensions	38.1 x 17.8 x 30.5 cm

Summary

Important Safety Instructions

Electrical Safety Precautions

Instructions to reduce the risk of electric shock when using the sewing machine.

General Operational Safety Warnings

Warnings to prevent burns, fire, electric shock, or injury during operation.

User Safety Guidelines

Guidelines for safe use by children and adults, including supervision requirements.

Disposal and Recycling

Information on the proper and safe recycling of the product.

Sewing Machine Components and Accessories

Identifying Machine Parts

Labels and descriptions of the various parts of the sewing machine.

Included Standard Accessories

Detailed list and identification of all standard accessories included.

Using the Extension Table

Attaching and Adjusting the Extension Table

Steps for attaching the extension table and adjusting its height.

Free-arm Sewing Feature

Initial Setup and Operation

Connecting Power and Controls

Instructions for connecting the power supply, foot control, and start/stop button.

Sewing Speed and Control

Adjusting Sewing Speed

How to use the speed control slider and foot control for sewing speed.

Sewing Machine Controls

Start;Stop and Reverse Functions

Operating the start/stop, reverse, and auto-lock buttons for sewing.

Needle Positioning and Speed Control

Using the needle up/down button and speed control slider.

Machine Interface and Stitch Selection

Understanding the LCD Display

Explanation of the information displayed on the LCD screen.

Using Function Keys for Stitching

How to select, adjust stitch patterns, width, and length using function keys.

Presser Foot System

Presser Foot Lifter and Holder

Using the presser foot lifter and attaching/removing the foot holder.

Changing and Adjusting Presser Foot

How to change the presser foot and adjust its pressure.

Thread Tension Adjustment

Achieving Balanced Tension

Guidance on adjusting needle thread tension for ideal stitch balance.

Troubleshooting Tension Issues

How to correct too tight or too loose needle thread tension.

Zigzag Stitch Tension

Balancing Zigzag Stitch Tension

Achieving balanced tension for the zigzag stitch appearance.

Correcting Zigzag Tension Problems

Troubleshooting tight or loose tension for zigzag stitches.

Feed Dog and Needle Position

Adjusting the Feed Dog

Instructions for dropping or raising the feed dog for specific sewing tasks.

Setting Needle Stop Position

How to configure the needle to stop up or down after sewing.

Needle Management

Changing the Sewing Needle

Step-by-step guide for safely changing the sewing machine needle.

Fabric and Needle Compatibility

Chart detailing needle selection based on fabric type and thread.

Thread and Bobbin Setup

Setting the Spool of Thread

Instructions for placing thread spools on the spool pins.

Bobbin Winding and Removal

Steps for winding a bobbin and removing it from the bobbin case.

Bobbin Winding Procedure

Step-by-Step Bobbin Winding

Detailed instructions and illustrations for winding a bobbin correctly.

Inserting the Bobbin

Correct Bobbin Placement

Guide on how to insert the bobbin and thread the bobbin holder correctly.

Threading the Sewing Machine

Upper and Lower Threading

Instructions for threading the needle and bobbin thread through the machine.

Needle Threader Operation

Using the Automatic Needle Threader

Step-by-step guide on using the built-in needle threader.

Drawing Up Bobbin Thread

Retrieving the Bobbin Thread

Instructions on how to pick up the bobbin thread to start sewing.

Basic Sewing Techniques

Straight Stitch Sewing

Fundamentals of performing a straight stitch seam.

Starting and Changing Sewing Direction

How to begin sewing and change direction effectively.

Sewing Thick Fabrics

Techniques for sewing through thick materials.

Measuring and Cornering

Using Seam Guides for Accuracy

How to use seam guides for precise seam allowances.

Technique for Turning Square Corners

Guidance on turning square corners neatly while sewing.

Adjusting Stitch Parameters

Changing Needle Drop Position

How to alter the needle's left/right position for straight stitches.

Adjusting Stitch Length

How to increase or decrease the stitch length.

Specialty Stitches

Lock-a-matic and Locking Stitches

Using Lock-a-matic and Locking stitches for seam reinforcement.

Triple Stretch Stitch

Application of the Triple Stretch Stitch for durable seams.

Stretchy and Decorative Stitches

Stretch Stitch for Knits

Using the stretch stitch to prevent puckering on knit fabrics.

Sculpture Stitches for Decoration

Creating decorative effects with sculpture stitches on garments.

Zigzag Stitch Functionality

Zigzag Stitch Overview

Information on the versatile uses of the zigzag stitch.

Adjusting Zigzag Stitch Width and Length

How to modify the width and length of the zigzag stitch.

Edge Finishing Stitches

Overcasting and Multiple Zigzag

Using zigzag and multiple zigzag for edge finishing.

Overedge Stitch Application

How to use the overedge stitch for seaming and overcast edges.

Stitches for Fabrics and Elastic

Knit and Double Overedge Stitches

Using knit and double overedge stitches for fraying fabrics.

Attaching Elastic with Stitching

Method for attaching elastic to fabric using the satin stitch foot.

Buttonhole Types

Overview of Buttonhole Styles

Introduction to square, round-end, and keyhole buttonholes.

Sewing Square Buttonholes

Procedure for Square Buttonholes

Step-by-step instructions for creating square buttonholes.

Stabilizer Plate for Buttonholes

Attaching and Using the Stabilizer Plate

How to attach and use the stabilizer plate for buttonholes on thick fabrics.

Specialized Buttonholes

Round-end Buttonholes

Sewing round-end buttonholes on fine to medium weight fabrics.

Keyhole Buttonholes

Sewing keyhole buttonholes on medium to heavy fabrics.

Corded Buttonholes

Creating Corded Buttonholes

Instructions for sewing buttonholes with a filler cord for thickness.

Darning Stitch

Darning Procedure and Variations

How to use the darning stitch, including shorter and same-sized darning.

Adjusting Darning Evenness

Tips for adjusting the evenness of the darning stitch.

Tacking Stitch

Tacking Procedure and Adjustments

How to perform tacking stitches, including shorter and same-size variations.

Eyelet Stitch

Sewing and Adjusting Eyelets

Instructions for sewing eyelets and adjusting their shape.

Zipper Sewing

Attaching Zipper Foot and Preparing Fabric

Steps for attaching the zipper foot and preparing the fabric for sewing.

Zipper Sewing: Starting

Initiating Zipper Sewing

How to start sewing a zipper, including fabric folding and pinning.

Zipper Sewing: Completing

Finishing Zipper Sewing

Instructions for sewing the second side of the zipper and removing basting stitches.

Blind Hemming

Blind Hemming Procedure

Steps for creating a blind hem using the blind hem foot.

Adjusting Needle Position for Hemming

How to adjust needle drop position for optimal blind hemming.

Sewing Buttons and Gathering

Sewing Buttons Securely

Instructions for sewing buttons onto fabric.

Gathering Fabric Effectively

Method for gathering fabric using specific stitch settings.

Decorative Stitching - Patchwork and Shelltuck

Patchwork Techniques

Instructions for patchwork piecing and decorative patchwork.

Shelltuck Stitch

How to create a shelled edge using the shelltuck stitch.

Decorative Stitching - Applique and Pintucking

Applique Stitching

How to sew applique designs and adjust stitch width.

Pintucking Technique

Instructions for creating pintucks using the blind hem foot.

Decorative Stitching - Fringing and Drawn Work

Fringing Technique

How to create a fringe effect on fabrics.

Drawn Work Technique

How to create drawn work effects on fabric.

Decorative Stitching - Cross Stitch, Fagoting, French Knots

Cross Stitch and Fagoting

Creating cross stitch designs and joining fabric with fagoting.

French Knots Stitch

How to sew French knots for decorative purposes.

Decorative Stitching - Scallop Stitch and Smocking

Scallop Stitch

How to create scallop patterns on fabric edges.

Smocking Technique

How to create smocking effects on garments.

Decorative Stitching - Clasp and Satin Stitches

Clasp Stitches for Quilting

Using clasp stitches to close quilt layers.

Satin Stitches for Decoration

Using satin stitches for decorative effects on fabrics.

Decorative Stitching and Pattern Correction

General Decorative Stitching Tips

Tips for sewing decorative stitches, including fabric alignment and backing.

Correcting Deformed Stitch Patterns

How to adjust feed balancing dial to fix deformed stretch stitch patterns.

Machine Care and Maintenance

Cleaning the Hook Race and Feed Dog

Instructions for cleaning the hook race and feed dog assembly.

Installing the Bobbin Holder

How to correctly install the bobbin holder after cleaning.

Troubleshooting: Warnings and Signals

Interpreting LCD Warning Signs

Guide to understanding warning signs and their causes on the LCD display.

Audible Signals and Meanings

Explanation of different buzzer sounds and their associated meanings.

Troubleshooting Common Issues

Problem Diagnosis and Solutions

Table listing common sewing problems, their causes, and solutions.

Stitch Chart Reference

Overview of All Stitch Patterns

Visual guide showing all available stitch patterns and their numbers.

Related product manuals

Janome Myexcel 23X/MX3123