Janome MXL50 - Darning Stitch; Darning Procedure and Variations; Adjusting Darning Evenness

34
Round-end and Fine Fabric Buttonhole
q Stitch pattern: 18
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 5.5.
The stitch density can be varied from 0.2 to 0.8.
Keyhole Buttonholes
q Stitch pattern: 19
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 5.5 to 7.0.
The stitch density can be varied from 0.3 to 0.8.
Use the seam ripper and an eyelet punch to open the
buttonhole.
q Eyelet punch (not provided with the machine)
q
4
w eq
4
w eq