Janome MEMORY CRAFT 9700 - Design Selection and Sewing

79
Mode Selection
Press the Embroidery Mode Key to enter the
Embroidery Mode. The following 5 categories are
available in the Embroidery Mode:
1 Built-in Designs
The Visual Touch Screen shows the Built-in Design
window when the Embroidery Mode Key is pressed.
the Memory Craft 9700 provides 95 ready to sew
built-in embroidery designs.
2 Monogramming
Press the Monogramming Key to open the
Monogramming window. You can sew monograms in
five different styles, Gothic, Script ,Cheltenham,
3-letters and 2-letters.
3 PC Card Designs
Press the PC Card Key to sew the designs from PC
Design Cards (optional items).
4 Card Reader 10000
The Memory Craft 9500 can read and sew embroidery
designs available from the Memory Cards for Memory
Craft 9000/5700 via the Card Reader 10000 (optional
accessory).
NOTE:
To connect the Card Reader 10000 and the Memory
Craft 9700, a special cable (optional accessory) is
necessary.
5 Editing
In the Editing window, you can modify and combine
patterns to create original designs.
6 Page keys
Press the Next page key to view the next page.
Press the Previous Page key to view the previous
page.
7 Hoop size
The appropriate hoop and its size for the selected
pattern are displayed on the screen.
SET
A Z
Edit
1
2
3
4
5
6
7
8
Designs
Hoop Size A(F): 126 X 11 0mm
A Z
Edit
1
2
3
4
5
6
7
8
Designs
Hoop Size A(F): 126 X 110 mm
1
2
3
4
SET
A Z
Edit
1
2
3
4
5
6
7
8
Designs
Hoop Size A(F): 126 X 110 mm
7
6
5