Janus Pantheon - Step 10: Fit Manual Chain Hoist

INSTALLATION INSTRUCTIONS
The manual chain hoist assembly may
be fitted to either side of the anchor
bracket as may be required to suit the
installation
Insert the shaft into the anchor
bracket section - rotate to engage the
mating hexagonal sections
( NB. main parts removed for photographic clarity)
Secure the shaft in position ensuring
that the screw does not prevent free
rotation
Fit the cast chain wheel and nylon
guide — retain with split pin— cut
chain to length and fit to chain wheel
An exploded assembly drawing is
contained in the accessory carton for
reference
STEP 10.
“Fitting the manual chain
hoist”