INSTALLATION INSTRUCTIONS
Locate the manual release cable
ensuring that smooth lever operation is
maintained
Avoid tight bends and promote generous
inner cable movement
Locate a suitable position for the lever
device
Secure the lever mechanism to the
structure with the lever moved toward the
right to actuate - full auto operation
Re engage the manual release pin at the
drive unit - ensure the drive unit is fully
engaged by gently moving the curtain of
the rolling door in either direction (up or
down) until the pin is locked into position
Check that the lever is able to withdraw
the manual release pin and re engage it
as required
Adjust the lever tension screw if required
to hold the manual release pin in the
manual condition—fit cover
STEP 11.
“Fitting the manual release ”
To Next Page
Loading...