7
1.0
20 ~ 60
1.6
44 ~ 84
2.0
60 ~ 100
2.5
80 ~ 120
3.2
108 ~ 148
4.0
140 ~ 180
5.0
7.0
180 220 ~
220 ~ 260
20.8 ~ 22.4
21.76 23.36 ~
22.4 ~ 24.0
23.2 ~ 24.8
23.32 ~ 24.92
24.6 ~ 27.2
28.8 ~ 30.4
27.2 ~ 28.8
4) Preset the welding current according to the type and size of the electrode, clip the electrode
and then welding can be carried out by short circuit arc starting. For welding parameters, please
refer to the table below.
Table 2-1: Welding parameters table (for reference only)
Electrode dia. (mm)
Recommended welding current (A)
Recommended welding voltage (V)
Note: This table is suitable for mild steel welding. For other materials, consult related materials
and welding process for reference.
2.2 Precautions
2. INSTALLATION AND CONNECTION
To Next Page
Loading...
