Jasic LS-15000F - Page 27

26
Figure 4-1 Wiring diagram
of single-phase distribution box
1) Single-phase AC power input: 220V;
2) Power switch of distribution box;
3) Earthing terminal row;
4) The machine should be connected with a power cord with the
specification of 3*4mm
2
or above.
5) Yellow-green earth wire (connected to the ground!);
6) Fuse: The machine should be provided with a fuse of not less
than 60A.
7) Please connect the power cords in the way shown in the
figure or other correct ways, with the main power supply being
off.
 Note: Do not operate with electricity!
 The machine can only be wired by a professional
electrician.
 Do not connect two machines to the same distribution box.