SAFETY INSTRUCTIONS
The welding devices conform to international safety standards. Safety is an
important issue in equipment design and manufacturing. There are, however, always
certain hazards involved in using welding equipment. Therefore, to ensure your
personal safety and the safety of your working environment, carefully read the safety
instructions below and respect them.
1 General points of safety
During the welding process, it may cause damage to you and others,
please do well the protection. For the details, please refer to the safety protection
guide to the operators that accord with the manufacturer accident prevention
requirements.
Electric shock—it may cause death!
In accordance with the application standard, install the grounding device well.
When the skin is bare, wearing the wet gloves or wet clothes, contacting with
live parts or electric welding rod is strictly prohibited.
Make sure that there is insulation state between you and ground as well as
workpiece.
Make sure that your working position is in the safe state.
Only connect the welding machine to an earthed electric network.
Note the recommended mains fuse size.
Do not take the welding machine inside a container, vehicle or similar work
piece.
Do not place the welding machine on a wet surface and do not work on a wet
surface.
Do not allow the mains cable to be directly exposed to water.
Ensure cables or welding electrode holder are not squashed by heavy objects
and that they are not exposed to sharp edges or a hot work piece.
Make sure that faulty and damaged welding electrode holder are changed
To Next Page
Loading...
