User Manual Javo Plus en Plus Extra Potmachine
Version 2015-1 4
1 Technical specifications and tolerances
This machine is intended to be used for filling pots automatically with substrate only. The filled pots are then
provided with a drill hole, in which a plant can be placed at the exit conveyor. This machine is meant for processing
pots, substrate and other materials that are described in this manual only. Detailed operation of the machine is
described in section "Operation".
This machine may be used only within the limits for specifications and tolerances of the order, on the
assembly drawing and indicated in this manual. If the machine is used outside these specifications, Javo BV
cannot take responsibility for this machine.
This machine is intended for products as agreed in the order confirmation only. To ensure the proper
operation of this machine, only products with specifications and tolerances as specified in the order may be
used.
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage
and danger to the operator and its environment.
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Untill proper CE Marking of the line is carried out, commissioning of this
machine is prohibited.
To Next Page
Loading...
