12
The handlebars of 22 mm (55/64 in.) outer diameter have a width of 670 mm
(263/8 in.). They are of one piece, the clutch and front brake cables being
adjustable by means of grub screws at the handlebar levers.
The front suspension consists of a telescopic fork with hydraulic dampers. It is
of the straight slider type with two cylindrical coil springs. The suspension
elements are protected by steel cover tubes. In the top portion of the front fork
stanchion tubes air valves are fitted through which compressed air escapes at the
down-stroke of the suspension.
The rear suspension operates on a circular path. The pivoted rear fork is sprung
by two cylindrical coil springs and fitted with hydraulic dampers. The suspension
dampers are protected by chromium plated steel covers.
The motorcycle could be 'locked by means of an ordinary pad-lock. A bracket has
been located for this in the L. H. side of the steering head, and the motorcycle
could be locked after completely turning the handlebars to the right.
List of Tools: -
Tyre lever with hook Spanner
Tyre lever
Double Ended Spanner 22/19
Double Ended Spanner 17/14
Double Ended Spanner 13/12
Double Ended Spanner 10/9
Double Ended Spanner 7/6
Combined Spanner 32/22
Tube Spanner 10 mm
Tube Spanner 14 mm
Tube Spanner 17 mm
Tommy Rod
Screw Driver 1
Tool Kit -Bag
To Next Page
Loading...
Need help?
General
