EasyManua.ls Logo

JAWA B - Electrical Equipment Maintenance

JAWA B
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Carburetter setting
Main
Jet
Idling
Jet
Needle
Position
Pilot air screw
slackened by
For running-in
92
45
4
th
notch
from top
½ turn
After running-in
92
45
3
rd
notch
from top
½ turn
Fig. 21. Carburetter. flange type
Carburetter 1 - Closing screw
2926 SBD for the 250 c.c. model 2 - Idling jet
3 - Pilot air screw
8. MAINTENANCE OF ELECTRICAL EQUIPMENT
Examine the leads from time to time and wind insulating tape round insulation
cracks. Damaged insulating can cause short circuits possibly entailing serious
damage to the battery.
Clean the sparking plug periodically. Carefully scrape off any carbon deposits,
set the contact gap to 0.45 mm. (0.018 in.) by carefully bending the contact to the
plug body.
The fuse is located in a bakelite case in the L. H. box next to the battery. When
replacing never use a fuse stronger than

Table of Contents

Related product manuals