72
Coupler
Tongue Jack
Use a small quantity of
WD-40 on moving mechanism
and all points of movement in
actuator to insure ease of op-
eration.
We recommend that you use
conventional grease on the ball
of hitch for ease of operation.
COMPONENT MAINTENANCE AVOID
Lubricate the jack by extend-
ing to full down position and
insert SAE 30 oil through oil
hole in top of jack. Do this
several times per season.
It is very important to check
tires often as noted in Chapter
3.
Tires
DO NOT ignore checking tire
P.S.I. pressures often. Always
check tire pressure during
travel & before each trip.
It is important to have brakes
adjusted by selling dealer at
200 miles after initial break-
in period. This operation may
not be included by selling
dealer as part of selling price.
After initial break-in it is rec-
ommended to adjust the brakes
following each 3,000 miles or
at beginning of each season’s
camping trips.
Brakes
It is very important to keep
brakes adjusted as poorly ad-
justed brakes will not func-
tion correctly and cause ac-
celerated wear.
Check cap for tightness be-
fore each trip. Make sure cyl-
inder is at full mark. Use Dot
3 automotive brake fluid.
Master Cylinder
DO NOT use grease or oil on
posts as this lubricant will
attract dirt and cause tent to
become dirty.
Lifter Posts
Your telescoping posts should
be lubricated semi-annually
with a light coat of silicone
spray to insure smooth,
trouble-free operation. Do not
permit spray to reach tent.
To Next Page
Loading...
