73
Bed Braces
Inspect and replace if bent or
damaged.
Using damaged bed braces.
COMPONENT MAINTENANCE AVOID
Winch
Cables
LP Gas System
Bed Slides
DO NOT smoke while chang-
ing bottles or any lines.
DO NOT allow any connec-
tion to be loose.
DO NOT use ammonia based
cleaners.
The winch should be lubri-
cated once per year, prefer-
ably at the season’s begin-
ning. Use a small quantity of
light oil on two upper shaft
bearings and also at each end
of main drum which cable
rolls on.
Pulleys and cables need no
lubricant at any time.
At the beginning of each
season:
1. Inspect all gas lines for
crimps and road damage.
2. Check all lines and con-
nections for leakage with
soapy water or leak detec-
tor.
3. We recommend that you
have the regulator checked
and adjusted to proper pres-
sure once a year. A gas
leak check should be per-
formed at least once a year
by a qualified technician.
Be sure to lubricate bed slides
twice per year with silicone
spray as you do the lifter posts.
Frame
Inspect, clean and repaint steel
members.
Apply a commercial rust treat-
ment.
To Next Page
Loading...
