25
5. Insert peg through the “eye” of the twist pole “B” and then through the hole at the
outer end of end divider bar “C”. The white rubber crutch tip will rest against roof
metal or the canopy bag. Install both ends.
6. Attach the Velcro hook sewn to the inner side of canopy to the Velcro loop sewn to
the outer side of the screen room, full length.
7. Wrap lifter post covers around posts and attach with Velcro.
8. Ensure all snaps are secure, fastening skirt to frame of unit.
9. Attach Velcro from skirt to Velcro on screen room lower corners.
10. Adjust three twist poles “B” so bottom of screen room is just touching the ground.
11. Install the 7 stakes through the screen room loops to protect against wind damage.
To Next Page
Loading...
