EasyManua.ls Logo

Jaytech RDO 1000 - Safety Precautions; Door Inspection and Entanglement Hazards; Compliance and Appliance Usage; Safety Reverse System Testing

Jaytech RDO 1000
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 2 -
3.Frequently examine the door installation, in particular,
springs and mountings for signs of wear, damage or
imbalance. Do not use if repair or adjustment is needed since
springs and hardware are under extreme tension and a fault
can cause serious personal injury.
4.To avoid serious personal injury from entanglement,
remove all ropes, chains and locks connected to the
garage door before installing the door opener.
5.Installation and wiring must be in compliance with your
local building and electrical codes.
6.The safety reverse system test is very important. Your
garage door MUST reverse on contact with a 40 mm obstacle
placed on the floor. Failure to properly adjust the opener may
result in serious personal injury from a closing garage door.
Repeat the test once a month and make any necessary
adjustments.
7.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capability,
or lack of experience and knowledge, unless they have been