JB Systems CMX 24 User Manual

CMX 24 12
20. DETAILED DISCRIPTION
1) Fade Time: the time that is needed to go from 0% to
100% or from 100% to 0%.
2) Single Mode: the program is executed step by step.
The number of each step appears on the display.
The speed is controlled by the Speed slider.
3) Mix Mode: all selected programs will run
simultaneously, each at their respective speed.
4) When the CHASE//SCENES led lights up, you can
select a program by using the sliders of Preset B. When
you put one of the Preset B channels in BLIND MODE then
its slider and the slider of Master A will control its output
level. The maximum level of the program is maintained
until you switch back the channel with the HOME key.
5) Fade Time & Speed Time:
A. When time is more than 1 minute, two dots appear.
E.g.: 1 minute and 15 seconds = 1.15.
10 minutes = 10.0.
B. When time is less than 1 minute, one dot appears.
E.g.: 11,5 seconds = 11.5
0,55 seconds = 0.55
6) Transmit and receive data
A. Open loop
B. Closed loop
TRANSMITTER
MIDI OUT MIDI IN
RECEIVER
MIDI OUT MIDI IN
TRANSMITTER
MIDI OUT
RECIEVER
MIDI IN

JB Systems CMX 24 Specifications

General

Brand	JB Systems
Model	CMX 24
Category	Network Router
Language	English