CMX 24 7
7. AUDIO INPUT
Line audio input 100mV—1Vpp.
8. REMOTE CONTROL
Full on and Black out remote control connection using 1/4"
Stereo Jack.
OPERATING INSTRUCTIONS
1. ENABLE RECORD
1) Press and hold the Record key.
2) Press Flash1, Flash 5, Flash 6 and Flash 8 in sequence.
3) Release Record, the led is lighting, recording is ready.
2. ERASE ALL PROGRAMS
1) Press and hold the Record key.
2) Press Flash 1, Flash 3, Flash 2, Flash 3 in sequence.
3) Release Record.
3. CLEAR MEMORY
1) Press the Record key and press the REC CLEAR key.
2) Release Record and Rec Clear at the same time.
4a. Record SCENE program
• Enable Record (see N° 1)
• Press MODE SELECT until the green led is on. (1-24 single/
preset park)
• Choose a page (1, 2, 3 or 4)
• Bring both MASTER faders fully up (A=open, B=closed)
• Prepare your scene, adjusting faders 1 to 24
• Press RECORD: the scene is memorised but has no number
yet
• Bring both MASTER faders fully down (A=closed, B=open)
• Press and hold RECORD
• Choose a Scene number (1 to 12) by pressing one of the
bottom FLASH buttons
• Release the RECORD button
• The SCENE is recorded
To Next Page
Loading...
Need help?
General
