CMX 24 8
• To exit the recording mode:
1. Press RECORD, then press EXIT
2. Release both buttons at the same time.
4b. Record CHASE program
• Enable Record (see N°1)
• Press MODE SELECT until the green led is on. (1-24 single/
preset park)
• Choose a page (1, 2, 3 or 4)
• Bring both MASTER faders fully up (A=open, B=closed)
• Prepare your first scene, adjusting faders 1 to 24
• Press RECORD: the first scene is memorised
• Prepare your second scene, adjusting faders 1 to 24
• Press RECORD: the second scene is memorised
• Keep on doing this until all your chase scenes are
memorised
• Bring both MASTER faders fully down (A=closed, B=open)
• Press and hold RECORD
• Choose a Chase number (1 to 12) by pressing one of the
bottom FLASH buttons
• Release the RECORD button
• The CHASE is recorded
• To exit the recording mode:
1. Press RECORD, then press EXIT
2. Release both buttons at the same time
5. DELETE A PROGRAM
1) Press the Page key to select the desired Page Led.
2) Press the Record key and hold it, then press twice on the
Flash 16 key.
3) Release the Record key.
6. ENABLE SCENE EDIT
1) Press the Page key to select a page.
2) Press Mode Select to select Chase//Scenes.
3) Press Edit and the desired Scene Flash key.
4) Release both keys, the selected Scene Led lights up and all
the others are out. Now editing is enabled.
To Next Page
Loading...
Need help?
General
