Steps:
BACKREST ANGLE FOR MODEL D09C, D09D
Backrest Angle Adjustment Step (For Model D09C, D09D)
1. Pull up hand lever of gas lift at back of backrest.
2. At the same time, hold top frame of backrest with one hancd and push down.
3. Release hand lever of gas lift when reach prefered angle of backrest.
4. Adjustment of backrest angel is completed.
1. Pull up lever of gas lift.
2. Keep on pressing lever till backrest autmatically return to original angel.
3. Backrest angel return to original postiong is completed.
Return to Backrest Original Position
Steps:
17
Photo 11. Backrest Angle Adjustment
Photo 12. Backrest Angle Adjustment
To Next Page
Loading...
